Skip to main content

Blog from M's system

How to Connect a Record Player: A Simple Guide

How to Connect a Record Player: A Simple Guide
News

レコードプレイヤーの接続は大きく分けて3パターン

お客様からのお問合せで、
「昔そろえたレコードを楽しみたいのですがどうやって繋げたらいいでしょうか?」といったご質問を頂くことがあります。

そこで、今回はレコードプレイヤーの接続方法についてかんたんにご紹介します。

レコードプレイヤーをお楽しみ頂くには、大前提として
“フォノイコライザー” という機器、またはこの機器が内蔵されたプレイヤーまたは、アンプが必要となり、大きく分けて3パターンの接続方法がございます。

1) フォノイコライザーを使用する場合

レコードプレイヤー、アンプ共にフォノイコライザーが内蔵されていない場合は、別途フォノイコライザーをご用意いただき、レコードプレイヤーとアンプの間にフォノイコライザーを取付けて頂くことで、お楽しみ頂けます。

レコードプレイヤー、フォノイコライザー、アンプ、スピーカーの順に接続する図

2) レコードプレイヤーにフォノイコライザーが内蔵されている場合

レコードプレイヤーとアンプを接続する際に、アンプのオーディオ入力端子(AUX)に接続することで、お楽しみ頂けます。

フォノイコライザーが内蔵されているレコードプレイヤーの場合、多くの機器でフォノイコライザーの有効・無効を切り替える設定がございます。

この設定を有効に設定してください。
※ 具体的な設定方法は、各プレイヤーの取扱説明書をご参照くださいませ。

レコードプレイヤーのフォノイコライザーを有効に設定し、アンプのAUX端子に接続する図

3) アンプにフォノイコライザーが内蔵されている場合

レコードプレイヤーとアンプを接続する際に、アンプのオーディオ入力端子(PHONO)に接続することで、お楽しみ頂けます。

フォノイコライザーが内蔵されているレコードプレイヤーを接続する場合はレコードプレイヤーのフォノイコライザーを無効に設定してください。

※ 具体的な設定方法は、各プレイヤーの取扱説明書をご参照くださいませ。

レコードプレイヤーのフォノイコライザーを無効に設定し、アンプのPHONO端子に接続する図

➡ つづき「アナログレコードを聞くには」もご覧ください。

レコードプレイヤーに最適なスピーカー
[ MS1001シリーズRS0802シリーズ ]

波動スピーカー MS1001シリーズ

Make your records sound even better.

Once connected, the next question is how it sounds. M's system wave-motion speakers don't project sound in a single direction — they spread it gently throughout the entire room. The warm sound of your records reaches you comfortably wherever you are, not just from directly in front — that is the kind of listening experience they offer. We provide materials summarizing compatible products and how to choose the right one for you.

Start with our materials, at home and at your own pace. And when you visit Shintomicho, a listening session awaits.

Frequently Asked Questions

What equipment is needed to enjoy a record player with speakers?+
To enjoy a record player, a device called a "phono equalizer" is required. You will need either a record player with a built-in phono equalizer, an amplifier with a built-in phono equalizer, or a separate phono equalizer unit.
How should I connect a record player and amplifier that do not have a built-in phono equalizer?+
If neither the record player nor the amplifier has a built-in phono equalizer, please obtain a separate phono equalizer and connect it by installing it between the record player and the amplifier.
When connecting a record player with a built-in phono equalizer to an amplifier, which terminal should I use?+
When connecting a record player with a built-in phono equalizer to an amplifier, please connect it to the audio input terminal (AUX) on the amplifier. Also, please ensure that the phono equalizer setting on the player is switched to "enabled" before use.
What should I be aware of when connecting a record player to an amplifier with a built-in phono equalizer?+
If your amplifier has a built-in phono equalizer, please connect the record player to the amplifier's audio input terminal (PHONO). In this case, if your record player also has a built-in phono equalizer, you will need to set the player's phono equalizer to "disabled".

More from our Blog

You may also be interested in

Latest Articles